The Problems Of A Starter Motor And The Ways Of Recognizing Them

You get into your car and you want to start your engine but you notice that the engine doe not want to turn over. This happens to several of us. Does this necessarily mean that the starter motor is bad? Not always. A bad starter motor is only one of the several possible causes. How does this work? The starter motor is attached to your engine. There can be a problem with a single pinion gear and starter pinion or freewheel damaged when you need to go for repair.

When you turn the key or press the button to start your car, the starter motor engages a little gear & turns over your engine to fire it up. For this to happen, the battery in your car should have enough charge and the auto transmission in your car should be in a park or neutral mode.

Starter Motor Replacement

How To Take Care Of The Car’s Starter Switch?

You will require to take care of the issue so that you do not get stranded on a busy day. Slow-cranking can probably be caused by your battery, the starter or the battery cables. When you continue to hear the slow cranking for two to three days together, then you should necessarily get your battery checked to free anywhere to sell batteries. This would be a great idea also to check the voltage at the starter end of the large cable which runs from the battery to the solenoid to ensure that you are receiving full voltage to the starter. A sticking key problem, switch or relay related problem can be one of the major ways in which you need to check out the repairing of the relay parts.

Power, Battery And Interconnectivity Works:

If you, by any chance, hear clicking but the starter is not turning on the engine, then there is a strong possibility that the issue is with the solenoid switch not properly connecting the power from the battery of the starter motor as this kicks in. You need to ensure that the cables and the battery are not in the problem. Now you can try and jump the two large lugs on your starter solenoid with a screwdriver in order to witness if the starter motor will run without engaging the solenoid.

Another issue that might come up in the starter motor is the starter motor not disengaging with the flywheel. When such a case occurs, then a lot of noise is being created when the starter motor is switched on. This also causes a lot of wear on the starter gear. Sometimes the starter will not be disengaged even after the engine stops. If you have a manual transmission, you can try leaving the car in gear and rocking it forward and back in order to release the starter from the flywheel. The reason why this is caused is a weak or broken spring which assists the starter drive to retract while the power is cut to the starting motor. In several cases when the issues are quite complex, then you should consider opting for a starter motor replacement.

This guide will help you in recognizing if there is an issue with the starter motor in your car. Once you point out there is something wrong, you should necessarily take immediate action without ignoring the early signs to avoid any further damage. You should start with recognizing the faults with the motor when you get lights but the motor does not work. There is no cranking sound in the engine also. If you already have a roadworthy certificate then maintaining the car becomes easier.