Everything You Need to Know About Chipboard and Wood Screws

When it comes to execution of construction projects, different types, sizes, and shapes of screws are usually used in other places, depending on the requirements. As you can guess correctly, the type of screws you use at a particular time depends on whether you need such screws at that particular time. Each screw type is best suited for a specific application. 

However, when using these different thread types, the exact name of each thread type may be used interchangeably, which can lead to serious confusion for those unfamiliar with these thread types. For example, chipboard screws and wood screws are typical examples of screws that are commonly used interchangeably in terms of names. An important fact to note is that these two types of screws share several functional similarities.

However, they each have their uses and differences, so they should never be used as a reason to have the same name. Therefore, in this article, we will discuss the main differences that exist between chipboard screws and wood screws.

The Ultimate Guide To Chipboard Screws: Everything You Need To Know

Plywood screws are also called plywood screws or MDF screws. It is equipped with a countersunk head (usually double countersunk), a narrow shank with a very coarse thread, and a self-tapping tip.

Countersunk Head/Double Countersunk Head: 

Thanks to the flat head, the cardboard screws are kept level with the material. The double countersunk head, in particular, is intended to increase the strength of the head.

Narrow shank:

A slim leg helps keep the material from splitting

Coarse Thread: 

Compared to other types of screws, the threads of MDF screws are rougher and sharper, allowing them to penetrate deeper and more firmly into soft materials such as plywood and MDF board. This means it helps draw out more of the material embedded in the wire, creating a firm hold.

Self-tapping tip:

The self-tapping information allows the clamping screw to be quickly hammered into the surface without pre-drilling. In addition, chipboard screws have other characteristics that are not required but can improve tightening performance in specific applications.

Spikes: 

Spikes under the head help clear debris for easy insertion and drive the screw flat into the wood.

An In-Depth Look At Chipboard Screws: Where They Are Used

Plywood screws are mainly used in woodworking, such as furniture and parquet assembly. Therefore, they are also called plywood screws or MDF screws. Chipboard screws ranging in length from 12mm to 200mm are available. Smaller chipboard screws are generally suitable for attaching hinges to chipboard cabinets, while larger screws are used to connect large pieces of furniture, for example.

There are two types of chipboard screws. White galvanized and yellow galvanized. Galvanization is not only a protective layer against corrosion but also suitable for the aesthetics of your project. Furthermore, our chipboard screws have deeper positive recesses that help prevent slipping and extend the life of the screw-driving bit.

Wood Screws Vs Chipboard Screws: What's The Difference?

Although there are significant similarities between wood screws and chipboard screws, some notable differences distinguish them.

When we talk about chipboard screws, they are primarily used where additional holding or adhesive strength is required. Nevertheless, when it comes to various mechanical operations on wood, plywood screws and wood screws are the preferred choices, serving as primary fasteners for joining wood together. Below highlighted are some points that highlight the similarities between wood screws and chipboard screws which are as follows:

Whatever you call these two different but closely related screws, they share many similarities in features and components.

1. Both have coarse threads and shanks, making them suitable for various woodworking applications.

2. Both of the screws can be used on various kinds of wood, including MDF, hardwood, homonymous plywood, and even softwood.

Interestingly, the difference between the two types of screws lies in the thread pattern. Wood screws and chipboard screws are very different in handle and thread pitch. A typical chipboard screw, for example, has threads that run the entire length of the screw to the screw head's bottom.

Conclusion

So while you are in the market searching for chipboard screws specifically, ensure you get the right ones. Now that you availed some ideas on those figuring out the right ones will get simpler for you.