Everything You Need To Know For Built In Wardrobe

A furnished house is a delight for the people who live there. It makes organizing things way too easy. Wardrobes are an integral part of interior designing. It makes your house look better and well-organized.

The readymade wardrobes are flourishing in the market, but there are a few things that one needs to understand before going for the built in wardrobes. In this section, we will try to emphasize them. So, below is everything that you need to know about built-in wardrobes:

Make sure you take the right measurements

Built-In Wardrobe

One of the first things that you would need to take into consideration is the measurement. With the help of your measuring tape measure the height of the wardrobes first and later make markings on the wall. See that you place your wardrobes at a higher level according to your reach. Wardrobes in the kitchen or washrooms are usually not kept at a lower base. Draw lines as to where you want to place the wardrobes and do not mess with the measurements as it can cause a lot of inconvenience during the installation process.

Choosing the right style

It is important that you choose the right style and design of the wardrobe. Remember, the wardrobe should not only be adding functionality to your place, but it will also add a shade of aesthetics. Hence, the colour, style, design and pattern must complement the place where you will be placing them.

Keep the wardrobes empty

It is very important that you must not keep anything inside the wardrobe while installing them, it makes the process easier and faster.

Drill the holes carefully

Always make it a point to drill the holes on the backside of the wardrobes and not cause any damage to the product. While drilling holes at the backside of the wardrobe, it makes it easier to install it in the right place.

Verify before placing them in place

Have a check if the doors and the drawers of the wardrobes open before installing them. There should be enough space to spread open the doors. Once you are doing with the verifying process, then proceeds with the installation.

Place the supporting nails by drilling them into the wall

Once you have placed the drilled nails on the wall, install the empty wardrobes on them. Check if the alignment is done carefully and the finishing is done neatly. Have a demo check if there is any chance for the wardrobe to lose balance and fall down. Use extra precaution regarding the installation.

Install the wardrobe doors

If the doors are attached to the wardrobe, then you have to install the entire set-up together, in case they are not, you must install the doors later. If you have a very low budget for your wardrobes cannot afford to spend more on wardrobe doors, then you can just paint the area and give a clean finishing. If you paint the utility well, there will not be any worry regarding the absence of the doors.

Keep the doors aligned and attach the handles

While installing the doors, you must check that the alignment of the door is right so that the door gets closed properly. Once the attachment of the handles is done, give a proper finishing touch to the entire place. If there is any visible damage fix it up. Have a final check on the wardrobes. Once you are done with this process, you are free to use the wardrobes.

Built In Wardrobe

Conclusion

Built in wardrobes are trending highly these days. However, these are things which require acumen and professionalism. Though a lot of stuff is easily available online from where you can order. It will be good to note that things will be smooth if you consult a specialist for this job. You can visit the stores and find out about the different options before you get ahead.